The SSD Anthology: Understanding SSDs and New Drives from OCZ
by Anand Lal Shimpi on March 18, 2009 12:00 AM EST- Posted in
- Storage
The Return of the JMicron based SSD
With the SSD slowdown addressed it’s time to start talking about new products. And I’ll start by addressing the infamous JMicron JMF602 based SSDs.
For starters, a second revision of the JMF602 controller came out last year - the JMF602B. This controller had twice the cache of the original JMF602A and thus didn’t pause/stutter as often.
The JMicron JMF602B is the controller found in G.Skill’s line of SSDs as well as OCZ’s Core V2, the OCZ Solid and the entire table below of SSDs:
| JMicron JMF602B Based SSDs |
| G.Skill FM-25S2 |
| G.Skill Titan |
| OCZ Apex |
| OCZ Core V2 |
| OCZ Solid |
| Patriot Warp |
| SuperTalent MasterDrive |
All I need to do is point to our trusty iometer test to tell you that the issues that plagued the original JMicron drives I complained about apply here as well:
| Iometer 4KB Random Writes, IOqueue=3, 8GB sector space | IOs per second | MB/s | Average Latency | Maximum Latency |
| JMF602B MLC Drive | 5.61 | 0.02 MB/s | 532.2 ms | 2042 ms |
On average it takes nearly half a second to complete a random 4KB write request to one of these drives. No thanks.
The single-chip JMF602B based drives are now being sold as value solutions. While you can make the argument that the pausing and stuttering is acceptable for a very light workload in a single-tasking environment, simply try doing anything while installing an application or have anti-virus software running in the background and you won’t be pleased by these drives. Save your money, get a better drive.
The next step up from the JMF602B based drives are drives based on two JMF602B controllers. Confused? Allow me to explain. The problem is that JMicron’s next SSD controller design won’t be ready anytime in the near future, and shipping mediocre product is a better option than shipping no product, so some vendors chose to take two JMF602B controllers and put them in RAID, using another JMicron controller.
Two JMF602B controllers and a JMicron RAID controller
The problem, my dear friends, is that the worst case scenario latency penalty - at best, gets cut in half using this approach. You’ll remember that the JMF602 based drives could, under normal load, have a write-latency of nearly 0.5 - 2 seconds. Put two controllers together and you’ll get a worst-case scenario write latency of about one second under load or half a second with only a single app running. To test the theory I ran the now infamous 4K random write iometer script on these “new” drives:
| Iometer 4KB Random Writes, IOqueue=3, 8GB sector space | IOs per second | MB/s | Average Latency | Maximum Latency |
| JMF602B MLC Drive | 5.61 | 0.02 MB/s | 532.2 ms | 2042 ms |
| Dual JMF602B MLC Controller Drive | 8.18 | 0.03 MB/s | 366.1 ms | 1168.2 ms |
To some irate SSD vendors, these may just be numbers, but let’s put a little bit of thought into what we’re seeing here shall we? These iometer results are saying that occasionally when you go to write a 4KB file (for example, loading a website, sending an IM and having the conversation logged or even just saving changes to a word doc) the drive will take over a second to respond.
I don’t care what sort of drive you’re using, 2.5”, 3.5”, 5400RPM or 7200RPM, if you hit a 1 second pause you notice it and such performance degradation is not acceptable. Now these tests are more multitasking oriented, but if you run a single IO on the drive you'll find that the maximum latency is still half a second.
The average column tells an even more bothersome story. Not only is the worst case scenario a 1168 ms write, on average you’re looking at over a quarter of a second just to write 4KB.
The G.Skill Titan has recently garnered positive reviews for being a fast, affordable, SSD. Many argued that it was even on the level of the Intel X25-M. I’m sorry to say it folks, that’s just plain wrong.
One of the most popular dual JMF602B drives
If you focus exclusively on peak transfer rates then these drives work just fine. You’ll find that, unless you’re running a Blu-ray rip server, you don’t spend most of your time copying multi-GB files to and from the drive. Instead, on a normal desktop, the majority of your disk accesses will be small file reads and writes and these drives can’t cut it there.
Some vendors have put out optimization guides designed to minimize stuttering with these JMF602B based drives. The guides generally do whatever they can to limit the number and frequency of small file writes to your drive (e.g. disabling search indexing, storing your temporary internet files on a RAM drive). While it’s true that doing such things will reduce stuttering on these drives, the optimizations don’t solve the problem - they merely shift the cause of it. The moment an application other than Vista or your web browser goes to write to your SSD you’ll have to pay the small file write penalty once more. Don’t settle.
But what option is there? Is Intel’s X25-M the only drive on the market worth recommending? What if you can’t afford spending $390 for 80GB. Is there no cheaper option?
Facebook
Twitter
RSS
250 Comments
View All Comments
Natfly - Wednesday, March 18, 2009 - link
DangerMouse4269 - Tuesday, April 13, 2010 - link
Nicely written. Even a very out of practice Comp Eng understood that.geekforhire - Monday, June 14, 2010 - link
I have just replaced the hard drive in this 3 year old Dell Inspiron 9400 notebook computer with a new and very quick OCZ SSD, manually configured the partition with a 1024 offset, freshly installed the OS, freshly downloaded all of the latest and greatest drivers from Dell, and applied all currently available OS updates from Msft.The problem is that when the machine resumes from Standby, it will /reliably/ (4 out of 4 attempts) produce a BSOD 0xF4 after the power button is pressed to resume the machine from standby.
Here's the sequence to recreate the problem:
0) Machine is booted normally into Windows, and log in to an account which has administrative privs.
1) Click on Start -> Shut Down -> Standby.
2) See display turn black, disk I/O light flashes then stops, then the power indicator light begins to flash on and off slowly.
3) Wait until the power light has made 2 slow flashes.
4) Press the power button.
5) See the Dell Bios splash screen, then disappear
6) Boom: See the BSOD 0xF4
The values reported after the STOP are:
(0x00000003, 0x865b3020, 0x865b3194, 0x805d2954)
Note that I've been in contact with OCZ before about this SSD+computer, because the previous BSOD that was produced was 0x77. Their recommendation was to create the partition with an offset with a 64 interval, and to reflash the SSD with their modern firmware. This was done, the OS was reinstalled as described, and now I'm getting a different BSOD code. Another mention was a question whether the notebook computer uses a SATA2 controller (definitely compatible) or SATA1 (which may have troubles).
I've run Spinrite on the SSD, and there are lots of ECC errors being reported. I've been in contact with Spinrite, and they chalk this up to the SSD being chatty (which they like), but since SSD's are new and magnetic disks are common, they want to stay focussed on magnetic disks.
When the machine boots back up, the OS reports that a serious error has occurred, and asks that a problem report be submitted, which I do. Then an attractive but somewhat generic page is displayed with common causes (Aging or failing hard disks, large file transfers from secondary media to local hd, loss of power to a hard drive, hard disk intensive processes (eg: antivirus scanners), recently installed hardware that might have compatibility and performance problems)
Has anyone else encountered this kind of problem, and do you have any suggestions?
angavar - Thursday, September 9, 2010 - link
As a medical student I can appreciate a well researched and analytical article when I see it. This is by far the best computer hardware review I have ever read! Thank-you for your time and effort in producing what is clearly a thoroughly researched and detailed analysis.mac021 - Wednesday, October 17, 2012 - link
Thank you for the lesson and helping me understand SSD drives. May I just ask for your advice...For everyday use designing and generating prototypes for websites and running typical office s/w like word and excel for long documentations while listening to music or just having some video play in the background, then the occasional gaming of, say Star Craft 2 and Dead Space 3, and lets assume I do this on a 5 hours a day average for 365 days in a year, how long before I need to replace an OCZ Vertex/Summit SSD? And does format/reinstall help in prolonging the life of an SSD just as it does for my old hard drives (from a computer that's 6 years old and counting)? Or there's no stopping the SSD's death after reaching 10,000 times of being erased and rewritten on? I'm not one who keeps upgrading or buying new computer systems for every new thing that comes out, i'm more of a keeper and maintainer for as long as the system servers my needs... but when I make a purchase, I make sure it will be enough to last me another 6-12 years IF possible! Which is why I'm still considering SATA for my next purchase late this year or early next year (and I'm only buying a new PC just because I made a mistake buying a foxconn motherboard that can't support anything higher than XP, not even Vista... weird, anyway I found that out too late).
Also, would you know of a motherboard that supports SSD, Windows 8, Nvidea, third gen i5/i7, and up to 64GB ram?
Thanks so much!
windows10 - Wednesday, November 30, 2016 - link
This article is meaningfull, interesting. thank you for sharingsusanbones - Tuesday, September 12, 2017 - link
I was wondered to these many responses here.