The Servers

AMD was kind enough to send us two servers, identically configured, from Colfax. The configurations were as follows:

  AMD Intel
Motherboard Supermicro H8DMU+ Supermicro X7DBE+
BIOS Revision DMU8157v3.ROM R1.3C
CPU 2 x Opteron 2350 (2.0GHz) 2 x Xeon 5345 (2.3GHz)
Memory 8GB (8 x 1GB DDR2-667) 8GB (8 x 1GB FBDIMM-667)
Hard Disk 1 x Seagate Barracuda ES (400GB) 1 x Seagate Barracuda ES (400GB)
Power Supply 700W Redundant 700W Redundant
OS Windows Server 2003 SP1, 64-bit Windows Server 2003 SP1, 64-bit

 

These are standard Socket-1207 servers, meaning they don't take advantage of the split power-planes of Barcelona. Newer motherboards (such as the one Johan used in his tests) will support split power-planes, allowing Barcelona to run its North Bridge at a higher clock frequency, thus improving memory performance. Note that our desktop benchmarks were run under Windows Vista Ultimate (32-bit). Update: AMD has confirmed that these motherboards are Socket-1207+ and thus support split power-planes. We apologize for the error.


2U Colfax server


Colfax Intel Server


Colfax AMD Server, one CPU removed

Both systems worked just fine, but we did spend more time with the AMD system (obviously). During our testing we'd occasionally get a Hyper Transport error upon reboot, but it was intermittent and didn't interfere with our results:

Then, at the very end (literally two hours before publication) of our benchmarking, the AMD server stopped POSTing. As of now the system will simply sit there and spin its fans without actually putting anything on the screen. A number of things could have happened, but thankfully the Barcelona system decided to die after we ran all of our tests.

The take away point here is that AMD is working as quickly as possible to push out this Barcelona release. While AMD states to expect availability as early as today, we're concerned about the maturity of these platforms. We got our test systems on Friday, if this were truly a large, widespread launch we would've had hardware long ago. Whereas everyone and their mom already has a sample of Intel's 45nm CPUs, Barcelona continues to be tough to come by and performance hasn't been anywhere near final until now.

Logistics aside, we now have final silicon in hand (and a dead server on our floor), so let's see what we can do.

2.0GHz Today, 2.5GHz Tomorrow The Methodology
Comments Locked

70 Comments

View All Comments

  • Anand Lal Shimpi - Monday, September 10, 2007 - link

    That's the first thing I tried, it didn't work :)

    Take care,
    Anand
  • hirschma - Monday, September 10, 2007 - link

    quote:

    That's the first thing I tried, it didn't work :)


    That's sad, truly. Any inside scoop as to whether a Socket F FX will be seeing the light of day anytime soon?

    Thanks for the reply, anand.
  • Visual - Monday, September 10, 2007 - link

    hey, that's bad news, but good that you let us know
    and i'm sure if you spam asus a bit they'll give you a bios fix before they even make it official :P
  • Visual - Monday, September 10, 2007 - link

    Same thing i posted two posts up :p
    The only 4x4 (official name is quadFX btw) board out now is ASUS L1N64-SLI WS, k8 opterons work fine in it... lets hope these will too.
    Though it probably will take a bios update to at least show the cpu name properly.

    Would with 4 pci-e slots and SLI support, overclocking features, plenty of room around the sockets (for a dual-socket board anyway) this would make an excellent desktop.

    I also hope more quadFX boards come out soon. I like the asus, sure... but at least an update to support pci-express v2 would be good. If they also managed to fit more memory slots and all 4 gigabit lan ports that are supported by the chipset, it would be even better. And having choice between more brands would be a good thing too.
  • TA152H - Monday, September 10, 2007 - link

    This is a review that should not have been made. The Barcelona review by itself was enough to let people know what they could expect from a Phenom, instead of introducing bad data onto the web. First of all, the Barcelona is different from the Phenom, they have different cache arrangements, and that does make a difference.

    And then, the chart about the Barcelona competing with two dual-core K8s is so bad I wanted to scream. The pair of dual cores can access memory at the same time, the single quad-core can not. This is not an advantage a K8 will have over a Phenom in equivalent configurations.

    I know you need hits for sites like this, but this is just a bad review. It's like telling everyone they are too stupid to really get an idea from real information, and instead need for you to use misinformation due to bad comparisons, to tell them what you think the performance will be like. It's bad.
  • sdsdv10 - Monday, September 10, 2007 - link

    Actually, if you read the beginning of the article AMD asked them (Anandtec) to do this.


    quote:

    We got a call earlier in the week asking if we'd be able to turn around a review of AMD's Barcelona processor for Monday if we received hardware on Saturday. Naturally we didn't decline, and as we were secretly working on a Barcelona preview already, AMD's timing was impeccable.


    Furthermore, AMD was responsible for the system the CPU's were tested on.

    quote:

    AMD shipped us a pair of 2U servers a day early,


    Don't go bashing Anandtech for doing something AMD asked them to do, just because you don't like the results.
  • MadBoris - Monday, September 10, 2007 - link

    It wasn't a review, it was a preview.
    It should be taken with a grain of salt, and yes the dual K8's is not the best comparison, it opens up even more questions to what the real world penalty from two sockets actually is.

    But all of us really want to know what it means for us, not just integer intensive tests but FP like for games, etc.

    Probably the most informative benchmark to me would have been the performance of a single core K8 vs K10, which would have showed me the improvements of the architecture and I can extrapolate alot from there. Running onecpu boot option with Vista could have done that, but they were pressed for time.

    Also Supreme Commander is one of the most CPU dependant games around, with rendering and sim threads, so it will clearly show CPU granularity probably better than any other game currently.
  • leexgx - Monday, September 10, 2007 - link

    we need to see Single Thread tests as well to see what an k8 cpu running in 1 cpu mode that an k10 can do in 1 cpu mode (both running at the same 2ghz speed)

    it has to be faster then my 3.1ghz cpu if i am going to get it (Quad be nice tho)

    and the tests should be done under XP if ony 1 cpu is going to be used Vista has to many services that can interfere with results (booting up into vista now is now resulting in Constant hard disk use whare as my XP setup just the start thats an little slow when desktop is first loading after that programs are faster)
  • MadBoris - Tuesday, September 11, 2007 - link

    quote:

    we need to see Single Thread tests as well to see what an k8 cpu running in 1 cpu mode that an k10 can do in 1 cpu mode (both running at the same 2ghz speed)


    That is what I said earlier as well, single threaded comparison between K8 and K10 would tell me alot...
    So http://www.techreport.com/articles.x/13176/5">techreport to the rescue.

    Cinebench single thread: (higher better)
    Opteron 2218 HE (K8 2.6GHZ) - 2449
    Opteron 2360 SE (K10 2.5Ghz) - 2385
    No architectural improvement witnessed here on a single core with k10.

    Myrimatch: (lower better)
    1 thread Opteron 2218 HE (K8 2.6GHZ) - 506
    1 thread Opteron 2360 SE (K10 2.5Ghz) - 656
    2 thread Opteron 2218 HE (K8 2.6GHZ) - 353
    2 thread Opteron 2360 SE (K10 2.5Ghz) - 373
    Decent improvement witnessed here on a single thread, but then 2 threads on K10(373) falls much closer to the level of K8(353). This protein benchmark likely reacts to some memory benefits, because other tests don't show raw computational advantages.

    STARS Euler3d: (higher better)
    1 thread Opteron 2218 HE (K8 2.6GHZ) - .53
    1 thread Opteron 2360 SE (K10 2.5Ghz) - .54
    2 thread Opteron 2218 HE (K8 2.6GHZ) - .96
    2 thread Opteron 2360 SE (K10 2.5Ghz) - .96
    No tangible architectural improvement witnessed here on a single core with k10 OVER k8.

    So it looks like the actual core architecture is not all that much better on K10 over K8. Surely nothing like the advance we saw with a Core 2 architecture (Although Intel had alot of room for improvement over prescott).

    The K10 begins to really advance and scale with 4 threads (probably a product of 2 socket penalty with K8). Scaling beyond 4 threads is obviously where the K10 will show it's legs, and 2 - 4 sockets on K10 is where it will scale better than Intel.
  • IntelUser2000 - Tuesday, September 11, 2007 - link

    Madboris, your analyzation on Myrimatch tests are wrong. Let's take a look at your post about Myrimatch:

    quote:

    Myrimatch: (lower better)
    1 thread Opteron 2218 HE (K8 2.6GHZ) - 506
    1 thread Opteron 2360 SE (K10 2.5Ghz) - 656
    2 thread Opteron 2218 HE (K8 2.6GHZ) - 353
    2 thread Opteron 2360 SE (K10 2.5Ghz) - 373
    Decent improvement witnessed here on a single thread, but then 2 threads on K10(373) falls much closer to the level of K8(353). This protein benchmark likely reacts to some memory benefits, because other tests don't show raw computational advantages


    It's time in seconds, meaning at one thread, Opteron 2218 HE is approximately 30% faster than the 2360 HE. In 2 threads, Barcelona does better as it closes up to the K8, but still doesn't have an advantage.

Log in

Don't have an account? Sign up now