Final Words

Conclusions have not really changed in our update to DDR performance testing on the DFI nForce4. Across the board, OCZ VX is the fastest memory that we have tested when comparing equivalent speeds. However, we also found that other top-performing DDR memory also does better on the DFI nF4. The result is that other top DDR memory is capable of achieving similar performance to VX, although they require higher CPU speeds and memory speeds to offset the slower memory timings and slower performance of the memory chips at the same speed. Results were closer between top competing memory than it appeared in our initial review, and we found this to be almost completely attributable to the better performance of nVidia 71.84 compared to the earlier 61.77 drivers.

In the end, the fastest memory that we have tested is OCZ PC4000 VX Gold. Across the range from DDR400 to DDR533, it outperforms any DDR memory that we have tested. This certainly proves that timings do indeed still matter, and 2-2-2 timings combined with a faster memory chip can yield impressive performance levels. The "gotcha" is that you will need a lot of voltage - up to 3.6 volts - to reach these performance levels. The DFI nF4 pair are the only productions boards we are aware of that can supply these kinds of voltages. You can also achieve these voltages on some motherboards by using the OCZ DDR Booster.

There is certainly good news for other top memory on the DFI nF4, however. Almost all of the memory could achieve roughly equivalent performance to the OCZ VX Gold at higher memory speeds and higher CPU speed. TCCD at 318x9 or 280x10 were roughly equivalent to VX performance at 267x10. This required both higher CPU speed and higher memory speed to offset the advantage of fast 2-2-2 timings and fast Winbond chips in OCZ VX. Crucial Ballistix came closest to OCZ VX performance across the curve, since Micron chips do appear more equivalent in performance to Winbond than Samsung TCCD. However, TCCD can reach higher memory speeds, which offsets the Ballistix advantage if your system is capable of the higher speeds. Corsair was particularly fast for a TCCD memory in the 466 to 533 range, exactly where it is targeted. The Corsair did not do as well at the highest speeds on the DFI as it has done on other platforms, but that can likely be fixed with a BIOS revision. In the end, everyone's top performances were pretty comparable.

If you have the means to reach the voltage levels required by VX , then OCZ Gold VX is definitely the fastest memory that you can buy. It tops out at DDR533, but it is just as fast at that speed as TCCD at DDR636 or DDR560 at higher CPU speeds. All 4 memories can achieve similar top performance levels, but OCZ VX Gold does it at the lowest DDR speed and fastest timings. Across its bandwidth of DDR400 to DDR533, OCZ VX Gold is the fastest memory that we have tested. At the top, other top DDR can match VX performance, but they require higher CPU speed and/or memory speed to offset the memory timing advantages of OCZ VX Gold.

Highest Memory Performance
Comments Locked

53 Comments

View All Comments

  • Wesley Fink - Wednesday, March 30, 2005 - link

    #9 - We reran everything in this review and took nothing for granted. Both results are the result of memtest86 on different BIOS, and a different pair of Platinum Rev. 3. I would guess the later BIOS is the difference. You can easily run the test yourself to check for best bandwidth, but 6 is the recomendation with this setup.

    #12 & #13 - You forgot that MSI won our nF3 Gold award and was our nF3 board of choice. The MSI also shared as the nF4 winner. With so many brands being pimped, it's hard to keep up :) We like the best performance - regardless of brand.
  • xsilver - Wednesday, March 30, 2005 - link

    "anandtech is the biggest dfi propaganda site on the web"

    I noticed that too.... but is it possibly due to the fact that their nf4 board is so much better than everybody else's??

    just like this memory is suprisingly better than the competition

    I guess what they are saying may be you are crazy to buy anything else for the same price.... however not everybody can affor a dfi nf4, 6800ultra sli + 1gb ocz vx memory
  • arswihart - Wednesday, March 30, 2005 - link

    i should say, before they were the biggest asus propaganda site, but tons of early problems with the sli have quieted them lately
  • arswihart - Wednesday, March 30, 2005 - link

    anandtech is the biggest dfi propaganda site on the web, where's the attention to all the other nf4 boards?
  • bigtoe36 - Wednesday, March 30, 2005 - link

    #6 there is always value VX if you don't want the warranty to 250fsb etc, you pays your money you take your choice.
  • PhoenixOrion - Wednesday, March 30, 2005 - link

    what kind of cooling on the cpu for the test config?
  • Viper4185 - Wednesday, March 30, 2005 - link

    Nice follow up article but there has to be a mistake somewhere on this page...

    http://www.anandtech.com/memory/showdoc.aspx?i=238...

    First you say this...

    "In the SLI roundup, we found a tRAS of 7 to be ideal for memory based on Samsung TCCD chips."

    Then...

    Therefore, a tRAS setting of 6 was used for testing wherever possible.

    I refer you to this article...
    http://www.anandtech.com/cpuchipsets/showdoc.aspx?...

    It says 7 here??? So which is best 6 or 7?
  • Lonyo - Wednesday, March 30, 2005 - link

    It would be nice to see some overall overclocking performances, using the FX-55 to see what the highest overclock you can gain is (obviously concentrating on the top memories).

    ie: If the VX was using with an overclocked FX55, how would it compare at max speed other RAM and the same CPU?
  • Zebo - Wednesday, March 30, 2005 - link

    Getting late I stutterd while typing.
  • Zebo - Wednesday, March 30, 2005 - link

    Waste money on a hyped brand name? Or save $100 or Save $100 with "Twinmos speed premium"... Your choice and google is your friend:)

Log in

Don't have an account? Sign up now