ATI Radeon Xpress 200: Performance, PCI Express & DX9 for Athlon 64
by Wesley Fink on November 8, 2004 6:00 AM EST- Posted in
- CPUs
Integrated Graphics Performance: Conclusion
When the nForce2 was released, its integrated graphics could outperform the slowest GeForce4 MX 420, but not much more than that. With the move to full floating point DX9 architecture, die space, heat and transistor count are much more valid concerns, and it would seem that the days of just integrating a company's entry level GPU are over.The Radeon Xpress 200 does one very important thing better than Intel's integrated graphics - compatibility. Since the underlying architecture is based off of the X300, game compatibility isn't much of an issue.
The performance of the Radeon Xpress 200 is better than the integrated graphics of Intel's 915G, but it's not the type of demolishing performance we would expect from a chipset produced by one of the top two GPU manufacturers. Then again, performance isn't what sells in this market, after all, despite how bad Intel's integrated graphics performs it still sells incredibly well. We would have liked to see better performance out of the Radeon Xpress 200, at least X300 SE levels but with only two rendering pipelines it's tough to do. We understand the tradeoff ATI had to make, we just wish it didn't have to be this way. We'd take the Radeon Xpress 200 over Intel's integrated solution any day, but we can always want more. Rumor has it that ATI's Intel chipset will feature an updated graphics core, so we may just get our wish sooner than expected.
SurroundView however does make up for things, enabling excellent multimonitor support for between 2 and 4 displays - something no other platform can currently promise. In our opinion, if you've got the monitors, SurroundView itself is worth the price premium of the Radeon Xpress 200 over the discrete-only 200P. For us, more desktop space is always a plus and with three monitors it's something that's quite attainable.
Integrated Graphics Performance Comparison (continued)
SurroundView: Enabling More than Two Displays
Facebook
Twitter
RSS
45 Comments
View All Comments
ImJacksAmygdala - Monday, November 8, 2004 - link
Good job Wesley and Anandtech staff, very nice article! Thanks for answering all the questions Wesley...Things are really heating up for AMD64 chipsets... I might just have to wait for Q1 2005, but then dual core CPUs will be the rage of rumor and HL2 is right around the corner ARGH!!!!!!
I might just bite the bullet and pull the trigger on an AMD64 3500+ with a Nforce4 or ATI chipset this holiday season because I really can't run HL2.... I cannot continue to wait for the next best thing. I have been waiting to upgrade since dual DDR was just a rumor... LOL!
xsilver - Monday, November 8, 2004 - link
Are these going to be shipping mainly for s754 or s939? I think determining factor will be price, cheaper than nforce 4 ultra? isnt that going to be $150+? I think they need to get closer to $100 for any serious challenges..Penty - Monday, November 8, 2004 - link
I don't know, I still want Tyan's new dual Opteron with dual SLI board.http://my.so-net.net.tw/brandon640410/NF41/004.JPG
Zebo - Monday, November 8, 2004 - link
Nice article. But I'm afraid, like the out-standing SiS ref board, these may never see light of day but in budget off brand products like ECS, FOXCONN, MATSONIC etc nVidia just seems to dominate the enthusiast sector.:(Wesley Fink - Monday, November 8, 2004 - link
#29 - A new Sounthbridge, called SB450, is due to debut the first of the year. It will feature High-Definition audio and other updates.RAID - Here is the reply from ATI regarding RAID on the Rx480/SB400:
"Your Raid answers are as follows:
Our Raid implementation will support up to 8 SATA devices. This is limited by ODM implementing appropriate amount of SATA channels on pcb.
1) Currently SB400 supports RAID on SATA, not on IDE (PATA).
2) IDE cannot be combined with SATA in RAID. Limited to SATA only.
3) We only support RAID 0 and RAID 1.
4) We do support hot swap for RAID 1. We can replace the failed hard disk and rebuild a new driver in RAID 1"
The review will be updated.
keitaro - Monday, November 8, 2004 - link
Here's a hardware question for you folks. Given that SLI is becoming more and more of an option, I'd like to know if the scenerio I thought up can be possible. Also, a general question is "What can a HyperTransport link be used? Is it specifically a link from CPU to north/south-bridge or is it a general link for general access?"The above question will basically determine if the scenerio I thought of is possible. Basically have a HT link big enough for an additional chip where it supports additional PCI Express lanes for 1x, 2x, or 4x slots. I see current chipsets designed with 20 lanes, or in ATi's case 22 lanes, and it got me to wondering if such a scenerio is truly possible that a full dual 16x instead of dual 8x can be a reality. If you can explain or answer this, that'll be great.
mctmcpoop - Monday, November 8, 2004 - link
The main problem of the ATI chipset will be the compatibility of south bridge ... Their south bridge sucks and that's why some of the RS350 motherboard use ULI south bridge instead of their solution ...http://techreport.com/reviews/2004q4/radeon-xpress...
You can check with the USB performance ... That can be called the most worst that I have ever seen ... And we still do not know if there is any compatibility issue of the USB interface unless there is a lot of ATI chipset based retail board hit the market …
And a preview board of chipset vendor is nothing important ... Where is the highly phrased SiS 755/755FX chipset based and good quality motherboard we can buy ? Sometimes there is something inside the chipset that we can reveal from the demo board if all the motherboard maker does not have the solution …
Anyway , time will tell …
FinalFantasy - Monday, November 8, 2004 - link
#27 I doubt ATI is doing that. If the mobo's that ship are noticealbe different (performance wise) from the one's ATI are sending out for review, I know that there will be a huge backlash from the hobbyist community and ATI knows this.blckgrffn - Monday, November 8, 2004 - link
Is no one else suspicious that ATI shipped out hand picked, thouroughly tested MOBO's that may not be representative of shipping boards? I will wait until I see a review of boards using this chipset in the future before I make up my mind.FinalFantasy - Monday, November 8, 2004 - link
Wow...ATI really stepped it up with their new chipset and integrated graphics solutions. This chipset should really give nVidia's NF4 a run for it's money. Also I agree w/#22...let's see some HDD performance benchies and what about an integrated software firewall or on-board RAID controller (article says similar to NF4's "Any-Drive")...how do these components compare to NF4's or does ATi's chipset even have them.I know I was skeptical about ATI coming out with an A64 chipset, but they've really gone above and beyond what I've expected with their "first" board. I am VERY impressed with their OC'ing performance.
I don't want to say that this new chipset is the best thing since sliced bread (I'm sure nVidia has a response to ATI's chipset in the works), but when it comes time to buy my 90nm A64 rev E0, ATI looks like they might have my business/money/whatever the hell you want to call it ;D.